User manual

Everything you need to get the most out of your Mango, from first charge to stacking a tower of sound.

In the box

• 1 × Mango speaker
• 1 × USB-C charging cable (USB-C to USB-C, 0.5 m)
• 1 × Quick start card
• Recyclable packaging, printed with soy-based inks

The controls

The top of Mango is a single soft membrane. There are no separate buttons to break or let water in, just five tactile zones that glow under your fingers.

• Play / Pause (center): tap to play or pause, double-tap to skip forward, triple-tap to skip back.
• Volume + and Volume −: tap to adjust, hold for continuous change.
• Bluetooth: tap to enter pairing, hold three seconds to switch source in multipoint.
• Beach Mode (palm icon): tap to lift the bass and widen the EQ for open air, tap again to return to balanced.

To power on, hold Play for two seconds. To power off, hold Play for four seconds. The LED halo confirms each action with a soft pulse.

First pairing

1. Charge fully before first use (about 2 hours by USB-C).
2. Power on. Mango enters pairing automatically the first time.
3. Open Bluetooth on your phone and select Mango.
4. The halo settles to a steady glow once connected.

Stereo Pair

To link two Mango units for left-right stereo: power both on, then double-tap the Bluetooth zone on either unit. The two halos will sync, then split into left and right channels. Double-tap again to return to mono.

Stack & Boost

Place one Mango on top of another. The three sculpted feet align magnetically into the lower unit. Stacked units share their signal and amplify together. There is no limit to how high you build, though three is the sweet spot for stability.

Care

• Rinse with fresh water and air-dry after sea or pool use.
• Do not machine-wash. Spot-clean the fabric with a damp cloth.
• Charge between 10% and 90% for the longest battery life.
• Store in a dry place if unused for long periods, at roughly half charge.